When it comes to any painting job, the key is to properly prep all surfaces prior to painting. With deck painting, it is imperative that you properly prep your decks wooden boards, and painting in between the deck boards. To prepare your deck for painting, you will need to take several measures to ensure you do the job the best way possible to guarantee the paint will last a long time. The process we will discuss includes how to prepare and paint an old deck, how to paint a new deck, how to paint pressure treated wood, and how to decide between painting or staining your deck.
Preparing Your Deck For Paint
Before you can paint your boards, you need to make sure you prep them properly. The preparation stage has several steps, which we will now go over.
Clean the Surface
The first step is to clean and wash your decks boards to remove any debris – this must be done even if your deck is new. Remove any and all furniture, grills, planets, etc., and thoroughly sweep your deck. After you have swept everywhere, you are ready to sand. It would also be worth your while to make sure you cover all sides of every board, and yes, that means underneath as well. Since your boards are exposed to a lot of moisture and temperature changes, if the underside of your boards aren’t painted, these changes can force your boards to expand and contract, wearing down the paint faster. To ensure a long lasting paint job, make sure to prep, prime, and paint all 6 sides of every board. Does this mean you can’t paint your deck if you can’t get underneath the boards? No, but understand that the paint will wear faster if the wood is not protected on all sides.
Sanding Your Boards
Sanding is one of the most important steps in the preparation process. During the sanding process, you need to remove all of the old paint, stains, and other residue from the wooden boards. You want to expose almost all bare wood and get rid of anything in the way. Make sure to also sand out any grooves, and imperfections. Only sand in the direction of the grain, and not against it. Almost always, the grain on wooden boards extends lengthwise.
How to Prep and Paint an Old Deck
There are some things to consider when working with older wooden decks. The deck painting process is still the same for an old deck, but there are a couple extra steps you need to address. For one, there may be a lot more imperfections in the aged wood, such as chips, splits, dents, and so forth. You may need to use a wood filler to fill out imperfections before priming. Any imperfections that you can see on the bare surface will show up in your paint or stain. In general, you want to make all surfaces smooth and flat to ensure the best paint job possible. Painting on top of old, cracked, unsanded, and chipped wood will not last a long time. If you don’t mind having imperfections show in your paint job, you can skip the wood filler, but you still need to sand, especially when dealing with older wood.
Cleaning Your Boards
After sanding, you want to go over your deck again and remove any debris, dust, and wood shavings to make sure your primer sticks onto the surface well. Start off with sweeping all over your deck again, and then start cleaning your deck. The most effective way to wash and clean your deck before painting is to get a deck washing solution, work it onto your boards, and use a pressure washer to remove everything. Once the surface has fully dried, you are ready to prime.
Priming the Deck
As with any painting job, it is also very important to prime the surface before applying paint or stain. Your deck boards need to be properly primed because they are constantly exposed to varying temperatures, moisture, humidity, and lots of foot traffic. Priming is especially important with wooden surfaces, since wood is very porous and absorbent of liquids that get on the surface. Although wood is porous, it is not consistently porous throughout all of the grain, and therefore may absorb the paint differently in areas, leading to an uneven paint job. Primer will close off small pores in the wood, allowing the paint or stain to hold better once applied. The primer will also ensure that the paint sticks properly, and will help you avoid any peeling, bubbling, or blistering in your finished paint job.
Painting Your Deck
Ok, so, you sanded, cleaned, and primed your boards. Now you’re ready to apply your paint or stain. The best way to go about this is to get a paint roller, and liberally apply the paint to your boards. Don’t use too much at a time though! You don’t want to waste the paint you paid for by spilling it all between your boards. Use a painting tray to remove excess paint from your roller. Once you go over the boards with a roller, grab a paint brush and get in the nooks and crannies, and paint in between the boards to spread the paint all over. Again, if possible, paint on all sides of the boards. It will extend the life of your paint job. Once you do two coats, you should now have a brand new deck! Softwoods absorb paint like a sponge, so a third coat might be needed for an even finish.
Staining vs. Painting
Frequently, people are torn between painting or staining a wooden deck, and aren’t sure which path they should go down. Here, we will briefly go over the pros and cons to deck painting vs. staining.
Painting a Wooden Deck
Deck paint has a lot of pros, and is a common choice for anyone repainting their wooden deck. For one, it is thicker, which helps protect the wood better, and can even hide imperfections in the wood if you couldn’t get everything out during the sanding stage. Paint is often the better choice for older decks, because of the thickness that can cover the old boards. Another advantage to painting versus staining is that there are a lot of color options in paint, and you can get just about any color you can imagine on your deck. Yet another advantage is that paint will last longer because of the thickness to it, and it is more durable. The only big drawback on deck paint is that it hides the natural look and beauty of the wood. Again, if you’re working with an older deck, this is generally not a concern and is the better way to go. A smaller setback is that dried deck paint can be a little slippery when wet, after raining for example.
Staining a Wooden Deck
Staining also has its advantages over paint. If you’re painting a new deck, or a pressure treated deck, staining may be the better option because it brings out the natural grain look of the wood. Stain is also easier to work with, since you don’t need to do two or three thick coats. Since stain is thinner, however, this leads to stain having a shorter life span than paint. Ultimately, there is no huge advantage to either, but it comes down to taste and what you’re working with. A newer deck is generally better with a stain, and an older deck is generally better with paint.
Tools and Cost
Whether you choose to stain or paint your deck, you will need certain tools and materials to get the job done. Everyone wants a ballpark estimate before starting, but it depends on what tools you have available to you prior to your project. Ultimately, you will need paint rollers, brushes, pans, paint/stain, primer, sandpaper, and a deck washing product. Prices vary on the brands, quantity, and types of paint/primer/stain that you end up purchasing.
If you’d rather not deal with the hassle of this project yourself, contact a local residential painter to get a free quote and have everything done for you, avoiding the stress of going through the process yourself.
WHAT THE PROS WON’T TELL YOU ABOUT PAINTING PROJECTS
In the endless jostling for pole position that is the hallmark of today’s business world, make no mistake about it: appearances are everything.
To thrive in the hostile business climate and carve a niche for yourself, your business has to do more than act the part; it also has to look the part.
There is no disputing the fact the aesthetic appeal of your commercial facility is one of the factors that can affect business success.
Your establishment has got to look good on the outside for people to want to find out what’s on the inside.
Keeping your building in great shape all year round will require a professional painting job as the first among many other things.
To guarantee fantastic results every time, here’s a look at some of those details commercial painters like to keep to themselves.
Surface Preparation is Essential
Commercial painters would agree that when it comes to painting jobs, the nature of the substrate is of paramount importance as it can bring the best or even the worst out of any painting job.
The substrate is the surface that is to paint. Different surfaces would require different treatments.
Preparation of the substrate could involve repairing cracks and holes, scraping, wire brushing, sandpapering, pressure washing, water blasting and even the use of special products recommended for cleaning painted surfaces or treating areas affected by mold.
Surface preparation is usually a time-consuming and labor-intensive detail, but if done right, it will improve coating adhesion and give a more beautiful and durable finish. If not done correctly or if skipped altogether, you could have a weak finish.
Choose the right type of Primer and Paint
Certain paints and primers are ideal for certain jobs. It is with this in mind that professional painting contractors always consider the requirements of a painting project before they recommend specific products.
Going for the cream is of the crop is indeed not a bad idea, but you should also note that there is no point in spending hugely on coating materials that won’t necessarily do the job on your property.
The paint and primer of your choosing should be one that can withstand all the potential mechanical, chemical and environmental stressors that will come into play.
It pays to note that for commercial wall painting projects, you are better served using glossier paints due to their stain resistance and ability to withstand frequent scrubbing compared to flat finishes.
Also, a tinted primer that is identical to the finish paint color will offer a much better coverage that a plain primer. Subtle details such as this can put you in rather a good stead.
You Need Equipment and Tools
It is never a good idea to bring a knife to a gunfight. If you’re going to do a good job of painting a commercial property, you’re going to need the right tools and equipment before you even get started on prepping the surface.
Paint scrapers, spackles, sandpapers, regular and specialty paint brushes, roller grids, paint rollers of various sizes, extension rods, rags for floors and a ladder of appropriate height are the usual suspects. But if you’re going to be handling a complicated job – such as those involving extreme heights or confined spaces – you might want to learn some professional painting techniques or leave it to the pros.
Have the Safety of Employees and Customers at Heart
In addition to adhering to OSHA standards and safety regulations, you can eliminate the dangers associated with on-site painting operations and curb accidents by keeping your work area clean and free of clutter.
This comes with the added advantage of promoting work efficiency. These trade secrets associated with painting projects can bring you up to speed and put you in the know, while helping you do a better job overall.
MUST-DO BEFORE HOME EXTERIOR PAINTING
It is the norm that in the longer and sun-shining days of summer, homeowners would be putting the needful in place to give their exteriors some new, lasting looks.
If you are going to go around hiring the handyman and get the job done yourself, then you need to know that preparation is part of the process.
Even before you pick up that paint brush to render your art, there are things you need to do so that finer finish would later be the case of your painting. Should you be hiring a company to help with your exterior painting, it would not break the bank to have them do these things as well.
This has to be one of the most underrated aspects of any paint job, mainly when it has to do with the exterior.
While some may say it is negligible, you would be doing your painting a solid by getting your hands a bit dirty. Your outdoors has a collection of different types of materials, whether it is some build-up of dust or dirt, grime and in some cases, moss.
You will ultimately be wasting your time, paint and hard work if you paint over even the slightest contaminated surfaces. Taking some sponge and soapy water, bring to your house’s exteriors and scrub to remove all that dirt and grime.
It may require more back-into-it if there are molds. If you have access to a high-pressure cleaner, do put it into your employ for the best results.
Sanding and Filling
When repainting an exterior surface that is in a slightly sorry condition, sanding and filling are particularly important.
Nevertheless, if the surface is relatively smooth, without much peeling a cracking, doing this is still worth the effort to give the surface light sand.
Sanding and filling are done to balance out the wall so your paintbrush can smoothly glide on the wall and apply the paint evenly. What you do not want to paint on is an uneven surface, because making the mistakes will cost you a lot. Use a body filler to fill holes, cracks, and gaps to create an as much consistent surface. A reasonably cheap filler solution or decorators caulk would do the trick also.
It is highly recommended that all walls be primed before a paint job, especially when you are looking to get a new color.
Outdoor surfaces such as timber can provide the adhesion need for the even spread of the paint. If it skips your mind to prime your to-be-painted exteriors, you may unsightly finishes.
Unless you take the initiative to add some primer coats, the new color you may be painting may still be faint enough to see through to shade, and that is not too professional.
Look for the perfect primer for your surface as there are different out there to suit timber, concrete, plaster, and metal. You are looking for the one that’s specially formulated for the surface you are working on.
Additionally, always remember to plan your paint job from the get-go. Plan well and take your time, because even if you are a professional, painting should be done cautiously.
Planning for a grand celebration at home? Do keep house painting in mind! Painting is the best and the safest way to put colors on those dreary walls and make the surrounding cheerful. If you would like to make your guests feel good and comfortable, house painting should be your top priority!
Achieving that luxe look for your home can be hard, especially when you have a limited budget. We agree that often updating a home needs a good amount of money. Well! That’s not true always. Being one of the most known painting company in Medford NJ, we are here to break this notion with some fabulous budget friendly home improvement tips. Fortunately, there are not one but many ways to smartly utilize the home improvement budget. In fact, these tips will have you spend a dollar & make your home look worth a million.
First impression is the last impression, especially when it comes to selling a home. It’s no secret that before putting a property on sale, it is quite essential to take up tasks that potentially can boost the value and help close a great deal on the sale. Apart from hiring the best property agent in town, there are several options that can increase the value of your home, spending very little money. Being one of the most recommended house painters in Voorhees NJ, we can relate to situations, when home owners don’t find the best deal on their property for sale. Based on our experience & market survey, we understand the importance of wall colors when it comes to selling a property.
Thinking about painting your home soon? Are you aware about the essentials to be put on the check list? Well! As a home painting services company that extends its services even in Moorestown NJ, we often come across gallons of questions from homeowners, requesting tips to help save on the overall cost of a home painting project, by doing the right things in a planned manner.
- Caulking Services (3)
- Colour Consultant (5)
- Commercial Painting Services (8)
- Custom Trim Work (1)
- Decorative Painting Services (1)
- Drywall Repair (1)
- Exterior Painting Service (14)
- Fire Place Painting Services (1)
- Home Improvement (28)
- House Painters (46)
- Interior Painting Service (33)
- Painting contractor (22)
- Painting services (32)
- Pressure Washer (2)
- Residential Painting Service (4)
- Uncategorized (1)
- Wallpaper Removal Service (1)
- Wood Staining Services (1)
- December 2020 (2)
- November 2020 (2)
- October 2020 (2)
- September 2020 (2)
- August 2020 (1)
- July 2020 (1)
- June 2020 (1)
- May 2020 (1)
- April 2020 (2)
- March 2020 (2)
- November 2019 (1)
- March 2019 (2)
- November 2018 (1)
- August 2018 (1)
- July 2018 (1)
- June 2018 (1)
- May 2018 (1)
- April 2018 (9)
- March 2018 (1)
- December 2017 (4)
- November 2017 (4)
- October 2017 (4)
- September 2017 (4)
- August 2017 (4)
- July 2017 (4)
- June 2017 (4)
- May 2017 (4)
- April 2017 (3)
- March 2017 (3)
- February 2017 (2)
- January 2017 (3)
- December 2016 (2)
- November 2016 (3)
- July 2016 (8)